DAS NX-148E LCD Codepad Manuale Utente Scaricare il pdf (Pagina 7)

System Ready

Type Code to Arm

System Not Ready

For help, press ºº

System Armed

All Zones Secure

CODE PAD FUNCTIONS

ARMING YOUR SYSTEM IN THE “ON” MODE

ON is utilized when the user is going away from the premise and wants the

interior protected. Listed below are the steps to arm in the ON Mode:

Step 1 Close all protected doors and windows.

# Ready light will be on or flashing when all protected zones and

sensors are secure. NOTE: If any zones are bypassed, a sensor

in that zone can be violated without affecting the ready light.

# The security system will not arm if the ready light is off. Refer to

"Making the System Ready to Arm" below.

# If the power light is off, you have no AC power. Restore power if

possible. If not, contact your installing company listed on page

12.

Step 2 Enter your 4 or 6 digit user code to arm the system.

# The armed and exit lights will illuminate.

# You may now leave the building.

NOTE: The exit light will flash rapidly for the last 10 seconds of the exit delay

as a warning to the user that the exit time is about to expire. The user may

wish to disarm and rearm the system if more time is needed.

1 2 3 4 5 6 7 8 9 10 11 12 ... 32 33

Nessun commento

DAS NX-148E LCD Codepad Manuale Utente Pagina 7